Ramsey 2013 Catalog - page 18

Sound Effects
18
There are many times when it’s nice to have a barking dog react to someone at your door or a strange noise in the house when
you’re gone, but not all of us can have a dog! The answer... the Electronic Watch Dog! This unique circuit generates two differ-
ent sounds of barking dogs. You can select which “dog” you would like! Then when your electronic dog “hears” a strange noise it starts bark-
ing!
Unlike a real dog, the super sensitive microphone has adjustable sensitivity to control what activates it (I mean makes it bark!). The “dog” produces 2 watts audio
output at 4 ohms. This dog doesn’t eat dry or moist dog food, instead it eats 2-8VAC or 9-12VDC! And it’s a little guy: only 5.6” x 3”! You can order the handy
power supply below. If you’re not building the doggie into your own case or application you can also order the custom case set below. From Velleman.
(I believe
our real watchdog has a bit more than 2 watts output!)
K2655
Electronic Watch Dog Kit
$39.95
WCAH2851
Recommended Universal Case Set, Requires Drilling & Board Mounting
$6.95
AC121
12VDC/1.0A Regulated Power Supply, 100-240VAC, Green Level-V Efficiency
$9.95
A barking dog on a PC board!
Two barking sounds!
Automatic sound detection!
Eats very little and never sleeps!
Automatically “Barks” At
The Sound Of Noise!
This electronic chime generates three different available chime tones which can be selected by individual switch closures. Perfect for replacing that
old doorbell buzzer or bell. It can also handle three separate door sounds! The IC design provides a clean audio output of a third of a watt into
any standard 8 ohm speaker (not included). The circuit runs on 4.5VDC (three 1.5V batteries, not included) or 6 to 9VAC which is normally provided
by the old doorbell transformers! Just use that if you have one.
Terminals are included for three separate switch contacts, speaker output, AC, and 4.5V battery connections. The compact board measures 2.1” x 2.3”
and can easily be installed in any suitable location. For a great finished look, order the recommended case set below. From Velleman.
K6600
Electronic Multi-Tone Chime Kit
$22.95
G416
Recommended Case Set For K6600, Requires Drilling and Board Mounting
$8.95
1, 2, or 3 tone selectable!
Adjustable tone and volume!
Uses batteries or doorbell supply!
Replace That Old Bell!
Electronic Watch Dog
Electronic Multi-Tone Chime
K I T
K I T
This cute little project authentically simulates the sound of a vintage steam engine locomotive and whistle! The unique design also pro-
vides variable “engine speed” as well as volume, and at the touch of a button the steam whistle blows! Includes a small 8 ohm speaker so
all aboard when you’re done building the kit!
Great for model railroads, sound effects for radio and stage, or just plain fooling around! Runs on a standard 9V battery (not included). Measures 3.9” x 3.3”. From Velleman.
(Could have used this with my old original Lionel set that was given away and is now worth a fortune!)
MK134
Steam Engine & Whistle Kit
$11.95
Vintage steam engine on a PC board!
Adjustable “speed” and volume!
Push button steam whistle!
Runs on a standard 9V battery!
Locomotive Breath!
Steam Engine & Whistle
K I T
Just like the good old days of the mechanical door bell, this little kit reproduces the
classic “ding-dong” sound through its built-in speaker. Plays it twice when triggered.
Use the built-in push button or wire external switches. Runs on 9-12VDC. Measures
2.75” x 3.8” x 1.2”.
MK177 Classic Ding-Dong Chime Kit
$11.95
Built-in push button!
External switch input!
Sounds just like the classic door bell
Runs on 9-12VDC
Is There Anybody In There?
Classic Ding-Dong Chime
K I T
We’ve been known for decades for coming out with little mini-kits that produce the
weirdest sounds! Well, this one is a mere drip in the bucket! Somewhere between a
dripping faucet and electronic “chime” in a new car! Just like a drip into a bowl of
water! Use it where a unique sound is needed. Learn how a simple oscillator works
too! Drives any speaker. Runs on 4-9VDC.
(That O-Ring kit won’t fix this one!)
EDF1 Electronic Dripping Faucet Kit
$14.95
Repeated “Plink” sound!
A pleasant alarm!
Like a drip in a bowl!
Runs 4-9VDC
Drip, Drip, Drip!
Electronic Dripping Faucet
K I T
One of the coolest effects yet! This little kit gives you professional echo chamber
results at a fraction of the cost. It features line level inputs as well as an on-board mic
for the input. It also features adjustable output gain, echo level, and feedback level to
give you the customized sound you’re looking for. Output is standard line-level for easy
connection to your audio equipment. Runs on a standard 9V battery (not included).
MK182 Digital Echo Chamber Kit
$22.95
Mic or line input!
On-board mic and amplifier!
Adjustable output level, echo, and feedback
40 Kb SRAM-low distortion and high quality output
Great Effect Tool, Tool, Tool, Tool!
Digital Echo Chamber
K I T
Years ago we came out with this little kit that was quickly given the title “The Mad
Blaster” because it produced a nasty and extremely loud warble tone. If you need to
simply get attention, this little mini-kit producing a LOUD 15W ear shattering raucous
racket is certainly the answer! Drives any 4-8 ohm speaker, but if you’re looking for
maximum volume use a horn type speaker. Drives any speaker, but a horn type pro-
vides the loudest sound. Runs on 9-12VDC, 12VDC producing the loudest “blast”!.
MB1 Mad Blaster Warble Alarm Kit
$9.95
Produces a startling warble alarm!
15W of power!
Real attention getter!
Our Original “Mad Blaster”
Mad Blaster
Warble Alarm
K I T
1...,8,9,10,11,12,13,14,15,16,17 19,20,21,22,23,24,25,26,27,28,...80
Powered by FlippingBook